PASSIVE STEAM BATH
INDUSTRIALIZED CONSTRUCTION SYSTEM FOR STEAM BATHROOMS
Our industrialized production system allows the customer to assemble the supporting structure quickly and cleanly.
Through 3D design, we configure the pieces for optimal installation in custom designs, even with curved surfaces in elevations and vaults.
Steam baths are a relaxing setting for spa areas. Our bathrooms offer wide versatility to adapt to each client and make custom designs for each environment. Choose between making the bench yourself using our standard parts or something already made in our kits.
SHOWER TRAY FORMATION ELEMENT
PARTS ADAPTED TO DIMENSIONS AND DRAIN POSITION OF THE STEAM BATH
The floor shaping pieces, 50 mm thick, include a socket for the elevation elements, facilitating assembly and fixing between them. Through the design based on the position of the drain, we ensure the correct evacuation of the water, shaping the necessary slopes.
STANDARD PIECE HEIGHT 2000 mm
Our elevation element design allows a perfect match both with other elevation elements such as vaults and / or straight ceilings.
We present different options of lower connection, both for fixing to existing floor (by means of stainless steel profile) and for floor elements with drain.
Reinforced anchoring systems are added for access doors or windows and elements of steam baths.
ELEVATION CORNER ELEMENT
STANDARD PIECE HEIGHT 2000 mm AND 90º
The elevation corner elements that we supply facilitate the correct assembly of the steam bath structure and are a better solution for the final finish.
PARTS ADAPTED TO THE DIMENSIONS OF THE STEAM BATH
The pieces that make up the roof ensure a perfect support on the elevation elements and with each other, thanks to the tongue and groove joints.
From the design of the steam baths, we make possible the different types of roofs:
- Straight flat roof
- Flat sloping roof
- Straight vault
- Advanced Surfaces Vault
Passive steam bath 360
Below you can see in the image on the right the global set of the new industrialized construction system for banks launched by EP-elementS.
If you look at the image, you can move with the cursor from left to right (by clicking on the image and holding down) to be able to rotate our models and analyze in greater depth the feasibility of placing our models in your projects.